Lihua Technology(HK) Industrial Co., Ltd.

Focus on Induction heating for 19 years

Large manufacturer of Induction heating automation equipment

+86 135 3907 6945 lh-induction@lihuachina.com
Lihua Technology(HK) Industrial Co., Ltd.

LHG-03A(C) Ultrahigh Frequency Induction Heating Machine

The working principle of ultrahigh frequency induction heating equipment is that place the workpiece in the inductor, the inductor is usually a hollow copper tube with intermediate or high frequency alternating current (1000-300000Hz or higher). The alternating magnetic field produce induced current with the same frequency in the workpiece, the induced current is not uniform, it is strong on the surface but weak in the internal core, the use of the skin effect, can make the rapid heating of the workpiece surface, in a few seconds, the surface temperature rises to 800-1000 ℃ and the core temperature is very small. Based on the skin effect, the surface of workpiece can be heated rapidly, can be heated to 800-1000ºC in seconds, but the increasing of internal temperature, is small.

Lihua ultrahigh induction heating equipment have the features as below:


Ultrahigh frequency(minimum welding 0.1mm), small bulk, light weight, low failure rate, saving energy (Saving energy 70% than glass ceramics electron tube high-frequency machine).

Welding point is firm, beautiful and exquisite, the shape of weldment are not limited, surface pattern won’t be damaged, metal internal crystal structure is unchanged, annealing range is small and no obvious welding scar.

Widely used in connector welding of metal glasses manufacturing industry, electrical and electronic industry, non-touch welding of small relay, high voltage-resistant welding in refrigeration industry, parts welding of jewelry industry and welding of metal ornaments and metal manufacturing industry.
  • Electric industry: the soldering of fine wire electronic components.
  • The welding & annealing of spectacle frame, spare parts.
  • Welding of jewelry & clocks.
  • Welding of carbide saw blade.
  • Welding of cutting tools , Quenching of knife edge.
  • Micro drill brazing of circuit board.
  • Heating or welding of precision parts of medical instruments.
  • Soldering of antenna & mobile phone base station.
  • Soldering of communication connector & copper connector.
  • Silver welding of thermostat cylinder.
  • Silver welding of diode, soldering of fuse.
  • Welding of Nickel film for Lithium battery and aluminum film.

Model

LHG-03AC

Output current

3-12A

oscillation frequency

200-1100KHZ

Output power

3KW

Input voltage

Single phase 220V, 50HZ/60HZ

Loading rate

80%

Cooling method

Water cooling

Weight

20KG

Cooling water flow

0.2Mpa,2L/min

Dimension

L430×W100×H120


Above specification is for reference only, exact specification will be based on the LIHUA lastest information.
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86 135 3907 6945
  • FAX:+86 769-8238 0903
  • EMAIL:lh-induction@lihuachina.com
  • ADDRESS:No.2, ZhuGang Road, ShaTou, Chang'an Town, Dongguan City, Guangdong Province, China 523861