Lihua Technology(HK) Industrial Co., Ltd.

Focus on Induction heating for 19 years

Large manufacturer of Induction heating automation equipment

+86 135 3907 6945 lh-induction@lihuachina.com
Lihua Technology(HK) Industrial Co., Ltd.

LH-80AB High Frequency Induction Heating Machine

  • Fast heating speed: The workpiece can be heated within 1 second.
  • Wide range of heating products: Induction heating can heat the entire metal; also it can heat a certain part of the metal.
  • Easy to install: connect power supply, induction coil and water inlet and outlet pipe for use;
  • The operation is easy: workers can learn in a few minutes.
  • Quick start: start heating after water is connected and power is switched on.
  • Less electric consumption: about 70% less than the old electronic tube high-frequency machine, the smaller the workpiece, the less electric consumption;
  • Good heating performance: the heating is very uniform and fast, less oxidation, no waste after annealing;
  • Protection: It is equipped with alarm indication, such as over voltage, over current, lack water and other alarm to control and protect the machine automatically.
  • Heating temperature is controlled: Induction heating can heat the metal to any certain temperature including the smelting point by control the heating time to satisfy the technology request.
  • 100% loading: can work for 24 hours with no stop.
  • Small size, light weight, saving plant space, well working econdition, environmental protection, no noise.
  • Induction heating doesn't like other normal traditional heating method; it can produce heat directly from the metal itself.

Because of its great advantages, induction heating equipment will replace the traditional heating. Induction heating is the general trend, and its future is bright.
  • Stainless steel industry: Annealing & stretching for stainless steel pots, stainless steel cans, stainless steel tube, stainless steel tableware, stainless steel cups, water tanks etc.
  • Hardware industry: Welding of lighting fittings, precision mold accessories, hardware handle, egg beater, drill bit, alloy steel and steel, steel and copper, copper and copper and other metals.
  • Metal fittings Industry: Annealing of golf club, copper lock, hardware fittings, kitchen knife, edge knife, aluminum pan, aluminum barrel, aluminum radiator and various aluminum products.
  • Medical industry: welding of needles, detectors, scalpel, etc.
  • Automobile industry: welding and quenching of automobile oil pipe joint, brake pad, drive shaft, automobile air conditioner pipe, etc.
  • Refrigeration industry: weld of  AC splitter, AC sight glass, AC condenser, AC tube, copper tube and so on.
  • Home appliance industry: Brazing of compound bottom pot, electrical kettle, coffee kettle and heating plate, brazing between stainless steel flat bottom, aluminum sheet and various shapes of electric heating tube.

Model

LH-80AB

Output current

400A-3200A

oscillation frequency

30-80KHZ

Heating time

1-99s(Auto mode)

Input voltage

3- phase380V, 50HZ/60HZ

Loading rate

100%

Cooling method

Water cooling

Weight

Host machine48KG

transformer 72KG

Cooling water flow

0.08-0.16Mpa,9L/min

Dimension

Host machine 

L730×W345×H600

Transformer 

L840×W420×H660



Above specification is for reference only, exact specification will be based on the LIHUA lastest information.
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86 135 3907 6945
  • FAX:+86 769-8238 0903
  • EMAIL:lh-induction@lihuachina.com
  • ADDRESS:No.2, ZhuGang Road, ShaTou, Chang'an Town, Dongguan City, Guangdong Province, China 523861